Item1
1
Materials
Steel, plate, mesh, fixings — margin set per line
Cost$40,304.00 Sell$50,380.00
| Description | Qty | Unit | Unit cost | Margin | Cost | Sell | |
|---|---|---|---|---|---|---|---|
$ | % | $32,240.00 | $40,300.00 | ||||
$ | % | $8,064.00 | $10,080.00 | ||||
| No materials on this item. | |||||||
2
Fabrication
Factory hours × rate — becomes the factory allowance
Hours492 Cost$28,536.00 Sell$47,084.40
| Description | Qty | Unit | Unit cost | Margin | Cost | Sell | |
|---|---|---|---|---|---|---|---|
$ | % | $28,536.00 | $47,084.40 | ||||
| No fabrication on this item. | |||||||
3
Installation
Site hours × rate — becomes the site allowance
Hours318 Cost$20,352.00 Sell$33,580.80
| Description | Qty | Unit | Unit cost | Margin | Cost | Sell | |
|---|---|---|---|---|---|---|---|
$ | % | $20,352.00 | $33,580.80 | ||||
| No installation on this item. | |||||||
4
Contract services
Outsourced work — paid out, so it comes off contribution
Cost$14,609.00 Sell$16,800.35
| Description | Qty | Unit | Unit cost | Margin | Cost | Sell | |
|---|---|---|---|---|---|---|---|
$ | % | $14,609.00 | $16,800.35 | ||||
| No contract services on this item. | |||||||
5
Allowances
Site measure, drafting, engineering, travel — office hours
Hours109 Cost$8,928.00 Sell$13,460.40
| Description | Qty | Unit | Unit cost | Margin | Cost | Sell | |
|---|---|---|---|---|---|---|---|
$ | % | $288.00 | $446.40 | ||||
$ | % | $5,400.00 | $8,370.00 | ||||
$ | % | $2,160.00 | $3,348.00 | ||||
$ | % | $1,080.00 | $1,296.00 | ||||
| No allowances on this item. | |||||||